Water Leak Detector

Water leaks are among the most costly faults a building can suffer, precisely because they grow unnoticed. The EPL-WDS2 responds the moment water first collects in the monitored area, reporting the leak while it is still small. Two point-type sensors connect to a single unit, so two separate risk areas can be watched at once, and the dry-contact relay output ties the device directly into a building management system, PLC or alarm panel. Designed and manufactured in Türkiye. KEY FEATURE Two-point water leak monitoring from a single unit. ADVANTAGES • Early warning, limited damage — The sensors sit at the lowest point in full contact with the floor and detect the first pooling of water, so the leak is reported before it can damage the structure or any electrical equipment. • Direct integration into automation — The NO-COM dry contact relay output works with building management systems, PLCs and alarm panels without any additional converter. • Adjustable delay against false alarms — A delay of 0 to 30 seconds prevents needless alarms during cleaning or brief splashes. The Alarm Snooze button silences an active alarm temporarily. TECHNICAL SPECIFICATIONS Country of origin: Türkiye · Compliance: CE Power supply: 24 VDC · Power consumption: 0.6 W / 25 mA Relay output: NO-COM dry contact Contact rating: 120 VA/30 W (1 A) – 240 VA/48 W (2 A) Alarm delay: 0 – 30 seconds (adjustable) Terminals S1: sensor input, point 1 · S2: sensor input, point 2 24V / 0V: supply input (24 VDC) COM: relay common · NO: relay normally open contact Cable cross-section: 2 mm² Environment and dimensions Operating temperature: -10 °C … +45 °C Relative humidity: ≤ 90% RH (non-condensing) · Protection class: IP-54 Dimensions: 62 × 103 × 37 mm · Weight: 200 g Mounting: DIN rail (TS35)